help@isu.edu http://help.isu.edu

Cisco 350
Wireless Card for Windows 9x/ME/2000

  1. Download the Cisco Client Utitily file
  2. Insert the Cisco Card while computer is turned on.
  3. The Add new hardware wizard will come up, Click Next to continue.
  4. Make sure Search for Best recommended device is checked, and Click Next.
  5. Check the Specify a Location box and Browse to downloaded file under Drivers/Win98200SE then Click Ok.
  6. Click Next to Search.
  7. Click Next when the Drivers are found, and then Finish when they are done.
  8. Click on the Installer icon.
  9. Click on Next to begin the install.
  10. On the next screen De-select everything that is marked, and click Next.
  11. Click Next to select the Default Directory.
  12. Click Next to Select the default Startup Folder.
  13. Click on Finish to complete the install.
  14. To start the Client Utility:
    1. Click on Start
    2. Click on Programs
    3. Click on Cisco Systems : Aironet Client Utility (ACU)
  15. From the Start Menu:
    1. Select Cisco Systems
    2. Select Aironet Client Utility (ACU).
    3. Select Commands
    4. Select Edit
    5. Select Properties.
    6. Click on Profile Manager.
    7. Click on Add.
    8. Enter ISU in the Box .
    9. Click Ok.
  16. Under Client name type your ISU username .
  17. Under SSID1: Enter the SSID you were given .
  18. Power Save Mode: Constantly Awake Mode .
  19. Network Type: Infrastructure.
  20. Select the Network Security tab and set the following values:
  21. Click on OK to save these changes.
  22. Click on Apply to exit the WEP Key Write Complete screen.
  23. Click on OK to save and exit.
  24. Select Commands
  25. Select Exit to exit the Aironet Client Utility.